Frames

ETA Smart Arms are meant to be used with smart electric tools or anything other than air tools. However, all Smart Arms still require a shop air connection for the float cylinder. Our Air Cylinder gives you the smoothest float of any method and decades of life (more than 50,000,000 rundowns). The volume of air needed is very low, less than 0.03 CFM. A 1/4″ (6mm) ID hose, at 80 psi (5.5 bar) minimum, is more than enough capacity.

EL506

Standard Duty Untooled Arm for lighter tools and fixtures

Maximum Vertical Torque

550 in-lbs (62 Nm)

Maximum Horizontal Torque

275 in-lbs (31 Nm)

Standard Base

12 inch (B125-12)

Maximum Tool Weight

6 lbs (2.7 Kg)

Maximum Reach

36" (915 mm) + Tool Holder

More Information

EL306

A shorter version of model EL506-N with less reach for smaller work areas. 10.3" (261mm) Vertical Travel

Maximum Vertical Torque

550 in-lbs (62 Nm)

Maximum Horizontal Torque

275 in-lbs (31 Nm)

Standard Base

8 inch (B125-08)

Maximum Tool Weight

6 lbs (2.7 Kg)

Maximum Reach

24" (610 mm) + Tool Holder

More Information

EL806

Medium Duty Untooled Arm with more rigid Parallel Rack than the 506

Maximum Vertical Torque

800 in-lbs (90 Nm)

Maximum Horizontal Torque

400 in-lbs (45 Nm)

Standard Base

12 inch (B125-12)

Maximum Tool Weight

6 lbs (2.7 Kg)

Maximum Reach

36" (915 mm) + Tool Holder

More Information

EL815

Heavy Duty Untooled Arm has a rigid Parallel Rack like the 806 with a larger Float Cylinder for higher tooling weights

Maximum Vertical Torque

800 in-lbs (90 Nm)

Maximum Horizontal Torque

400 in-lbs (45 Nm)

Standard Base

12 inch (B125-12)

Maximum Tool Weight

15 lbs (6.8 Kg)

Maximum Reach

36" (915 mm) + Tool Holder

More Information

EL315

A shorter version of our EL815-N for smaller work areas. 10.3" (261mm) Vertical Travel

Maximum Vertical Torque

800 in-lbs (90 Nm)

Maximum Horizontal Torque

400 in-lbs (45 Nm)

Standard Base

8 inch (B125-08)

Maximum Tool Weight

15 lbs (6.8 Kg)

Maximum Reach

24" (610 mm) + Tool Holder

More Information

EL1015

Extra Heavy Duty Untooled Arm has thick Parallels with Cross Ties for even more rigidity and a larger diameter Shoulder Pin and Bearings than the 815.

Maximum Vertical Torque

1,100 in-lbs (125 Nm)

Maximum Horizontal Torque

600 in-lbs (68 Nm)

Standard Base

12 inch (B125-12)

Maximum Tool Weight

14 lbs (6.3 Kg)

Maximum Reach

36" (915 mm) + Tool Holder

More Information

EL1025

The same Extra Heavy Duty Parallel Rack as EL1015 but with our largest float cylinder and balance controls added for 25 lb (11.4 Kg) tooling weight capacity. Included B250-0 kit has Heavy Duty Base Plate with 2-1/2 npt threads and a 2-1/2 to 1-1/4 npt reducer. It is intended to make it convenient for customer to produce a robust mounting base simply by purchasing threaded pipe of the necessary lengths.